F154

DESCRIPTION:

The F154 Series luminaire shall consist of an injection-molded UV stabilized globe, a spun aluminum hood assembly, an aluminum cage, an internal optical system and a mechanically fastened slip fitter (capital). The aluminum cage shall consist of eight cast aluminum struts and a cast alunimum ring jig-welded together. The cage shall be mechanically fastened to an extruded aluminum slip fitter with three strainless steel socket set screws. The fitter shall house a ballast assembly, which shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3-3/4" ID tenon and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process