The F140 Series luminaire shall consist of a cast aluminum hood assembly, an aluminum cage, a multi-panel diffuser, an internal optical system and a slip fitter (capital). The hinged hood, equipped with a cast aluminum finial, shall rest on the aluminum cage, which shall consist of six diffuser panels, cast aluminum struts and a cast aluminum ring. The cage shall be welded to a spider-leg cast aluminum fitter. An internal ballast assembly shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Ask about this product