Decorative

  • Filter
Category: Decorative

The F126 Series luminaire shall consist of an cast aluminum hood assembly, an aluminum cage, a multi-panel diffuser, and an internal optical system and a slip fitter (capital). The hinged hood, equipped with a cast aluminum finial, shall rest on the cage, which shall consist of eight diffuser panels, cast aluminum struts and a cast aluminum ring mechanically fastened together with stainless steel hardware to the gasketed fitter. The fitter shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Category: Decorative

The F127 Series luminaire shall consist of an cast aluminum hood assembly, an aluminum cage, a multi-panel diffuser, and an internal optical system and a slip fitter (capital). The hinged hood, equipped with a cast aluminum finial, shall rest on the cage, which shall consist of eight diffuser panels, cast aluminum spike struts and a cast aluminum ring mechanically fastened together with stainless steel hardware to the gasketed fitter. The fitter shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Category: Decorative

The F130 Series luminaire shall consist of an injection-molded UV stabilized clear polycarbonate diffuser, a spun aluminum shade assembly, a cage, an internal optical system and a mechanically fastened slip fitter (capital). The extruded aluminum cage shall consist of four struts jig-welded together. The cage shall be secured to the cast aluminum fitter with a quarter turn twist lock system with a security bolt. The fitter shall house a ballast assembly, which shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 4" OD tenon and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Category: Decorative

Specification Features

  • Die-cast aluminum and spun housing for strength, elegance, and simple maintenance;
  • Acrylic U.V. stabilized clear cylinder diffuser;
  • Concealed gasket seals against insects, dust and moisture, IP 55;
  • High power factor ballast with quick disconnect wiring system for easy maintenance;
  • Medium and mogul base sockets optional;
  • 70w to 250w PSMH and HPS lamp or QL/ICETRON or LED lamp operations;
  • Quartz Restrike emergency lamp optional;
  • IES type V;
  • Electrostatically applied thermoset polyester powder-coated finish.
Category: Decorative

The F126 Series luminaire shall consist of an injection-molded UV stabilized tubular diffuser, a spun aluminum hood assembly, an internal optical system and a slip fitter (capital). The hinged hood shall rest on a cast aluminum ring welded to extruded aluminum struts. The diffuser shall be held in place with positive pressure applied by the hood assembly. As an option, lower third of the diffuser can be frosted. The fitter shall be made of cast aluminum and shall house the ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Category: Decorative

Product page under construction.

Please contact us for more details

Category: Decorative

The F138 Series luminaire shall consist of an injection-molded UV stabilized diffuser, a spun aluminum hood assembly, an internal optical system and a slip fitter (capital). The hinged hood shall rest on a ring welded to cast aluminum struts attached to the fitter with stainless steel hardware.. The diffuser shall be secured to the spider-leg fitter with stainless steel hardware. The internal ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.