F176

DESCRIPTION:

The F176 Series luminaire shall consist of an injection-molded UV prismatic acrylic diffuser, a spun aluminum shade assembly, and an aluminum cage. The aluminum cage shall consist of four extruded aluminum ring mechanically fastened together. The diffuser shall be secured with stainless steel hardware. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall be equipped with either a 2" OD or 3-1/2" OD tenon and shall be secured to an arm with three hex socket screws spaced 120 degrees apart and a security bolt.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.