F174

DESCRIPTION:

The F174 Series luminaire shall consist of an injection-molded UV stabilized diffuser, a spun aluminum hood and shade assembly, and an internal optical system. The diffuser shall be secured with stainless steel hardware. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall be equipped with either a 2" OD or 3-1/2" OD tenon and shall be secured to an arm with three hex socket screws spaced 120 degrees apart and a security bolt.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.