F146

DESCRIPTION:

The F146 Series luminaire shall consist of a spun aluminum hood assembly, a cast aluminum cage, a multi-panel diffuser, an internal optical system and a slip fitter (capital). The hinged hood, equipped with a cast aluminum finial, shall rest on the aluminum cage, which shall consist of six diffuser panels, cast aluminum struts and a cast aluminum ring. The cage shall be mechanically fastened to the fitter. An internal ballast assembly shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.