F125

DESCRIPTION:

The F125 Series luminaire shall consist of an injection molded UV stabilized globe, a cast aluminum cage, an internal optical system and a mechanically fastened slip fitter (capital). The cage shall consist of eight sturts and a ring jig-welded together. The cage shall be welded to the fitter. The globe shall be secured to the gasketed fitter with stainless steel hardware. The fitter shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.