F117

DESCRIPTION:

The F117 Series luminaire shall consist of an injection-molded UV stabilized acorn-diffuser, a spun aluminum hood assembly, a cast aluminum cage and a mechanically fastened slip fitter (capital). An optional clear upper portion of the hood is available for uplight. The cage shall consist of four struts with decorative medallions with a flower motif and a ring all jig-welded together. The cage and the diffuser shall be secured to the cast aluminum fitter with stainless steel hardware. The fitter shall be made of cast aluminum and shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL,CSA and ENTELA  listed and labeled.

 

Installation

The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).

 

Finish

All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.